I have just finished a 1/23.5 scale model of the CSIRO Investigator for the Australian Marine National Facility. The model was constructed timber and 3D printed components printed on my new Zortrax M200 printer. It will be displayed by the client in a clear acrylic case at the Marine National Facility in Hobart.
Late last year I built a number of elements for the National Maritime Museum in Sydney for their “Container” exhibition. Including a 1.8m long blue whale. Here are some shots and explanation of the building process.
Here the shaped whale has been covered with a layer of 300gram fibreglass mat and resin. It was then sanded and multiple layers of automotive putty applied and sanded back.
The eye detail was carved from the auto putty before it cured. In a small window of time it can be carved, somewhat like a block of cheese. Additional shaping was achieved with an air drill before final sanding.
The fin is a sheet of high density MDF sanded and shaped. The skin texture under the mouth is again carved (in sections) into the un-cured putty.
The fluke is made from laminated sheets of high density MDF first shaped on a belt sander to give it some organic curves, then hand sanded sanded and attached.
Once all the detail was resolved a few layers of primer putty were sprayed on, with sanding between each layer.
The whale was finished with a coat of a grey blue and detailed by airbrushing the skin patterning. The whole unit was sealed with a low sheen auto acrylic clear coat. Finally a metal plate was added for fixing the unit to the wall.